With so many options available in the market choosing the best headers for 440 mopar can be tricky for normal customers. Consumers can get overwhelmed by the huge marketplace and end in a place by choosing a wrong product that will not serve its purpose perfectly.
The purpose of this review is to avoid misunderstanding and help the customer with a shortlist of the most popular products of the marketplace by analyzing the features, functions, specifications, customers rating, and reviews.
This review section will help you with the selected list of the most favored and trended items of the marketplace where you can easily check the reviews from the actual customers.
Top 10 Best Headers For 440 Mopar
Here are the top headers for 440 mopar we picked, check their features.
1. Remflex 6002 Exhaust Gasket for Mopar V8 Engine, (Set of 2)
- Remflex’s unique flexible graphite material has been proven for more than 30 years
- 1-7/8 inch width x 1-3/8 inch height Square Port; Mopar V8 – 361, 383, 400, 413, 426 Wedge, 440, 1-7/8″ x 1-3/8″ square Port, Manifold or Headers, 2/Set
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Fit type: Universal Fit
2. ALLOYBOLTZ – BIG BLOCK MOPAR BBM 383 400 413 426 WEDGE 440 STAINLESS ENGINE HEX BOLT KIT
- Give Your Big Block Mopar Engine a new look with our 254 Piece Stainless Steel Hex Bolt kit!! Our special intake washers are 1/8 thick. The bolts in this kit are made from 304 stainless steel. SEND A MESSAGE IF YOU HAVE AFTERMARKET COMPONENTS.
- This Bolt Kit is compatible with all 383, 400, 413, 426 Wedge, or 440 Mopar Engines.(Non-EFI). This is a complete high quality stainless steel hex bolt kit. The kit includes individually packaged and labeled component kits for the following items:
- Kit comes with components for the Intake Manifold- Valley Cover- Timing Cover- Water Pump- Oil Pan- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Crank Pulley-Fan Pulley- Carb Stud Kit.
- The carb stud kit is compatible with Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold.
- Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These washers are designed to Clear Large Tube Headers.
3. Southwest Speed BLACK LONG TUBE HEADERS FOR 67-80 MOPAR 273-360 SMALL BLOCK,CHALLENGER,CHARGER,FURY,BARRACUDA
- Pair of Brand New Southwest Speed Flat Black Long Tube Headers for 1967-1980 Mopar Passenger Cars with Small Block 273-360ci Engines (SWS Part #440-2646)
- Fits: Chrysler: 1975-1980 Cordoba | Dodge: 1976-1980, Aspen 1971-1974 Challenger, 1968-1978 Charger, 1967-1976 Coronet, 1968-1976 Dart, 1978 Magnum, 1968-1978 Monaco | Plymouth: 1968-1974 Barracuda, 1967-1970 Belvedere, 1970-1976 Duster, 1967-1978 Fury, 1967-1968 GTX, 1968-1975 Roadrunner, 1967-1974 Satellite, 1967-1976 Valiant, 1976-1980 Volare
- Header Specs: Material Type: Steel, Header Styles: Full Length, Tube Direction: Down Swept, Flange Thickness: .375″, Finish: Painted Flat Black, Hardware Included: Yes, Gaskets Included: Yes, Tube Outside Diameter: 1 5/8″, Collector Diameter: 3″, Reducers: 2 1/2″
- Header Return Policy: In the event you order a header that will not fit your vehicle and application, you may return them for a refund, providing you don’t damage the header. When you receive the header the finish will be protected and must remain unscratched for a refund. If you bend or dimple any of the tubes or scratch the finish, we will not be able to sell the header and will not be able to process a refund. Repack them well to prevent damage returning them to us.
- Note: Will not fit models equipped with air injection cylinder heads. Will not fit after-market Brodix B1-BA cylinder heads due to changed in the port & spark plug locations. Will not work with column-mounted manual shifters.
4. Remflex 6019 Exhaust Gasket for Mopar V8 Engine, (Set of 2)
- “1-7/8 inch width x 1-5/8 inch height square port; mopar v8 – indy 440 cylinder head, 1-7/8″ x 1-5/8″ square port, 2/set”
- heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- the aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials; remflex exhaust gaskets fill those gaps permanently
- there are no rubber binders or composite materials in remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Fit type: Universal Fit
5. Exhaust Elbow Gasket 18-2849-1 27-818832 27-863726 Fits Mercruiser Stern Drive 4 PCS
- Aftermarket Manifold Gasket,Contains 4 PCS
- Made of High Quality Material,Provide the best seal
- Matches OEM hole and port patterns for an exact fit
- Replaces Mercruiser Stern Drive 27-863726, 27-860232, 27-818832, 27-871051, 27-87105
- Replaces Mallory 9-61414, GLM 32080, Osco 8503-GO
6. AIP Electronics Dragon Fire High Performance 10.2mm Ignition Spark Plug Wires Set Compatible with 1959-1972 Dodge Mopar Chrysler 383 400 413 440 fo
- MANUFACTURER: Dragon Fire Performance MODEL: Sport Series Direct Factory Fit
- WIRE DIAMETER & RESISTANCE: 10mm 150 Ohms per foot
- Compatible with 1959-1972 Chrysler Dodge Plymouth 5.9L 6.3L 6.7L 7.2L 361 383 413 440 V8 (HEI CAPS ONLY)
- FEATURES: Industry Leading High Heat Silicone – High Performance Coated Copper-Nickel Alloy (CuNi) (3:1) Conductor – Precision Wound at 100 Turns per inch (+/- 10%) for Maximum Voltage Transfer and Superior RFI/EMI Protection – Kevlar Core – High Tensile Strength Fiberglass Protection Mesh – High Temp. Rated to 600F – Extra Thick Boot Wall Design – Long Service Life
- WIRE LENGTHS – 1×22″ 1×27.5″ 1×34″ 1×35.5″ 1×39″ 1×41″ 1×46″ 1×56″
7. A-Team Performance – Ready 2 Run Distributor, 8.0mm Spark Plug Wires, 45k Volts Canister Coil, and Coil Wire – Compatible with Chrysler Dodge Mopar
- Ready 2 Run Distributor, 8.0mm Spark Plug Wires, 45k Volts Canister Coil, and Coil Wire
- Compatible with Chrysler Dodge Mopar Big Block 413, 426, 440 R2R Red Cap
- A-Team Performance Ready to Run Distributor is perfect for a street performance ignition upgrade
- Canister coil-style, oil-filled internal construction, 45000 Volts maximum voltage, and 350 spark duration. Universal, intended for high-performance distributor ignition set-ups, and should only be vertically mounted
- Silicone Spark Plug Wires Set: Black 90 Degree Boot for Distributor, Black Straight Boot for Spark Plug
8. 100pcs Male Header Pins, Lystaii Straight Single Row 40 Pin 0.1 Inch (2.54mm) Male Pin Header Connector PCB Board Pin Connector Electronic Componen
- VALUE PACK : Package include 100pcs male header pins.100 Pack male pins are adequate to use for a long time.
- SIZE : Pin Pitch :0.1 inches / 2.54mm; Number of pins: 40pin.Straight single row.Suitable for Arduino, Raspberry Pin or any other electronic project.
- ESSENTIAL ELECTRIC COMPONENT : Straight mounting, Single row, Male pin header, essential electric component, easy to use.Good quality header pins, header pins on 0.1 centers.
- CUTTABLE : They are easy to be cut to any length if needed.They are suitable for electronic project.
- APPLICATION : This connector is widely used in electronic circuit, electrical appliances, instrumentation ,PCB circuit board and so on.
9. Percy 66036 Seal-4-Good Flange Gasket
- Package Weight : 0.5 pounds
- The package length is 23 inches
- The package height is 0.5 inches
- The package width is 4.25 inches
10. JDMSPEED New 10.5mm Spark Plug Wire Set Replacement for HEI SBC BBC 350 383 454 Electronic
- AFTER MARKET HIGH PREMIUM QUALITY
- 10.5mm Racing Spark Plug Wires
- Universal Set For SBC & BBC Chevrolet Engines
- Ready for Install Straight out of the box
- Please make sure to check fitment below!!
How to Choose the Best headers for 440 mopar: Buying Guide
When it comes to choosing the right headers for 440 mopar, you should be assured that you are making the right choice. Understanding about the product before buying it is the most important part. Sometimes with so many options, evaluating the right choice at the right moment can be problematic.
So, check out the buying guide to overcome all the hassle of finding your best solution.
Features of the headers for 440 mopar
The first thing to check out on any product is the feature. You have to locate the useful features that will come in handy in your needs. Sometimes a product can be filled with tons of features to look good on normal eyes but their features can be worthless in practical use.
So, before choosing the right item you need to evaluate the features from the feature section and the description section to see if you are going to use them or not. If the products come with some of the efficient features, you can undoubtedly choose them.
Check the Specifications
Sometimes, we don’t have enough time to check on the specification section and are quickly drawn to buy a product. While the products we are suggesting here are the best ones according to the users, we still suggest taking a look at the specifications.
The specifications of the headers for 440 mopar will let you informed about the uses and advantages of using the products. You can then determine if that can fulfill the purpose of your needs.
Yes, there can be a few problems understanding the whole specification section if it is too long. What we suggest is to look for the key features, performance, how much the products going to cost and their after-sale services.
Design of Product
The market is full of wonderful products, and it can be tough to decide which one to choose. However, the first impression you can make of the item is the overall design.
You can check out the material, finish, color, and other visual aspects of the product to get a taste of the manufacturer. If you like the overall design, you can check out other factors before choosing the item.
Seller Rank in the Marketplace
If you buying the products from our shortlisted table, then one thing you can consider is to check the seller rank. A trendy and growing product means it is delivering good performances to most of the customers.
And better trends and growth of selling means better seller rank. And headers for 440 mopar from a good seller rank will ensure not only good quality of the item but also a better after-sale service and good warranty service if available.
Durability and Stability of the Product
You need to check out the description and reviews section to see how durable and stable the product is. A good product will be durable, will last longer, and will provide stable uses throughout its lifetime.
The headers for 440 mopar we have suggested have mostly been made in a way to last longer with providing stable performance in uses, but the best thing is to click the item and check out the stability and durability according to your personal need.
User Friendliness and Comfort
No one wants discomfort and critical toughness when using a product. Comfort is one of the most important considerations when choosing the headers for 440 mopar. Most of the products that are selected in this article are popular which means have better served the most users.
So, we are certain that these products are comfortable and user-friendly enough to satisfy most customers. But you can watch each of the products on our list to see which fulfills your satisfaction the most.
Frequently Asked Questions (FAQs)
What is the Price Range for headers for 440 mopar?
The item can come with several cost ranges. The price can go up depending on the quality of the items and the ability to last longer periods, functions, specifications, features, and reliability.
The modern marketing trends have left us with little clues on the actual price. Sometimes a product manufactured cheaply can cost a lot more than a quality one. Some manufacturers spend more on marketing than manufacturing creating better reach and less quality.
So, you should compare the price of the products from our review segment to select the best features, quality, and performance of the product in a certain price range.
Why Should You Buy the headers for 440 mopar?
If you need an item, then understanding the scenario is simple. But if you are not, then think sensibly if the benefits of this product will certainly fulfill your need. Ask yourself, why do you want to have the product.
What we have suggested in our top pick is the best items according to many users. If you have made up your mind, then you can read the reviews of the customers before choosing the right item.
When Should I Buy a New headers for 440 mopar?
There can always be a question if:
Is it the right time to buy the headers for 440 mopar, or you should wait for few times to see if the right products have been launched to serve your need?
It is pretty difficult to determine if the products that are actually on the marketplace are the best, or the best items are yet to come. But the suggested products are popular and have very good reviews from a lot of customers.
So, if you need the product right now, wasting any time is not sensible.
Which Type of headers for 440 mopar is the Best?
There are different types of headers for 440 mopar in the marketplace. Understand your need first. Which type of this product will be most beneficial to you. You can also go through the product list and see their reviews, pros, cons, and then select the best type of items for now.
I hope our product table, review section, and buying guide will help you determine the right items for your need. If you are looking for the best headers for 440 mopar then there are multiple options from our product list.
You can go check out the short features of these items from our review to pick one or two to check for further reviews. Click these products and see the reviews of the customers, description of the products, and rating of it to make a final decision for buying it.